Mooring Buoys (hard polyethylene and foam filled)

 

Item No Ø (mm) L (mm) Circumf. (mm) Gross Buoyancy (kg) Ø Rod (mm)
PE M40 330 360 1015 17,0 12
PE M50 405 460 1270 34,0 16
PE M60 480 500 1525 61,0 16
PE M75 605 660 1905 120,0 16

- Længden er angivet uden stang!

- Fås med enten kort eller lang stang.

In principle intended for the same use as ordinary, inflatable mooring buoys, but in stead of being made of soft PVC, this is a buoy of hard polyethylene, which has subsequently been filled with PUR foam. Consequently, it cannot immediately sink.
REMEMBER to use the lower eye when you moor your boat to a mooring buoy. Thus the boat will always keep in contact with the anchor. The upper eye is only intended for lift of buoy and double safeguarding.
Do NOT use stainless steel together with galvanized iron, as it will start a galvanic corrosion, causing very quick breakdown / rusting through of the lower eye and the chain. IMPORTANT!

Back to Buoys

Fisheries Supply  |  2 John Duncan Court, Varsity Lakes QLD 4227  |  Tel +61 7 5593 4661 |  Fax +61 7 5593 5709